PrinLab – painettavan elektroniikan laboratorio

Plasma treatment system provides a solution for the cleaning and activation of component surfaces before further processing. Plasma surface treatment can be used to improve wettability and adhesion of ink, glues and coatings on many different surfaces.

Plasma treatment system has following properties:

• potential free discharge
• high speed production (both sheet and R2R process)
• automatic discharge air regulation
• standby air flow
• output discharge control
• PlasmaREMOTE HMI control unit
• 5 Plasma generators with PlasmaTEC-X nozzles

More specific information

Dimatix DMP-2800 is a cost-effective, easy-to-use precision materials deposition system.

DMP can be used in applications such as:

• Material and ink development and evaluation
• Printed electronics prototype and sample generation
• Ink and substrate interactions evaluation
• Printed electronics product development
• Optimization and evaluation of digital patterns
• Deposition of biological fluids

The E2 semi-automatic screen and stencil printer has been designed for printing of a large variety of flexible and rigid substrates for applications with small to medium size production volumes, R&D as well as prototyping purposes.

Our Ekra E2 is equipped with:

• manual optical positioning system MOPS
• print nest 250 x 250 mm with porous stone
• vacuum option with standalone vacuum pump
• diamond squeegees 250 mm and 125 mm 70 – 75 shA

Download datasheet

Topography scanner system has following properties:

• non contact optical measurement
• Dimensions
• 3D topography
• Film thickness
• Roughness
• Measurement speed up to 675000 3D-points/s
• 2000 points/line
• 4.4 mm length/line
• 2.2 x 10 x 1 µm point resolution (X x Y x Z)
• Precision / point < 1 µm

More specific information: X400.pdf

UV curing chamber for laboratory use and small scale manufacturing processes.

• Lamp power 2 kW with two level power setting.
• working capacity of 45 x 40 x 30 cm

Equipped with UVAPRINT 100-200 HPV UV radiation device which can be attached also to PrinLab R2R line.

Spec sheet

The tabletop series dispensing tool is an XYZ computer controlled platform that can drive precision dispensing pumps. With the necessary nSoft software, any pattern can be printed in the XY plane and raised into the Z plane for a conformal surface.

The tabletop series micro dispense pump dispensing system offer precision in both 3D (XYZ) printing accuracy and dispensing volume.

Our Tabletop dispensing system is equipped with:

• Heated smartpump 100, generation 1
• Process view camera system
• Heated vacuum chuck
• Operator assisted vision alignment

Download datasheet

PalmSens Potentiostat/galvanostat

Interface for electrochemical sensors.

• PSTrace program with serial and USB cable connection to PC
• Shielded cable with connections for a working, counter and reference electrode
• AC adapter and built-in battery for standalone operation
• PalmSens SDK for making custom measurements

Supported techniques
More specific information

MultiEmStat multi-channel potentiostat

• Multi potentiostat with 8 independent EmStat2 potentiostats. 

  • MultiTrace + PSTrace software and USB cable connection to PC

More specific information

R2R device is equipped with Flexo, Gravure, Hot embossing and Rotary screen printing units. It also has hot air drying capacity of 5,5 m.

Main adjustable parameters & limiting values:

• web speed 0,1 – 26 (flexo 18) m/min
• web tension
• controlled printing unit speed (compared to web speed)
• web width max. 80 mm
• Print repeat length 409,58 mm